The main advantages of the system are as follows:
Yes, the joint faces must be dry and free of dust, grease, loose components, and other separating materials.
It depends on the type of surface. RubberElast® is always applied without primer. If RubberElast® does not adhere to the substrate, an additional primer can be used.
Choosing the right size of RubberElast® determines the width of the joint edge and the final joint width. RubberElast® is inserted into the joint and compressed to up to 20% of its original size. This means the material exerts lateral pressure in the joint. If the joint edge is too narrow, RubberElast® will be forced out of the joint. If the joint width is too large or too small, the sealing effect cannot be achieved. Let our staff advise you. We will also be happy to send you our table for selecting the right size.
It does not react chemically with other substances but, once properly compressed, it can withstand water pressure.
The force required depends on the selected tape size and the prevailing ambient temperature. To calculate the correct amount of force, refer to the information in the technical data sheet.
INDUSTRIAL RECENSE S.L. en el marco del Programa ICEX Next, ha contado con el apoyo de ICEX y con la cofinanciación del fondo europeo FEDER. La finalidad de este apoyo es contribuir al desarrollo internacional de la empresa y de su entorno.
Parque empresarial de A Pontenova.
Parcelas 33 – 39 · 27720 · A Pontenova (Lugo) · España
Lunes a Jueves: 8:00 a 18:00
Viernes: 8:00 a 13:00
Sábados y Domingos: Cerrado
